Notch SafeBloc

  • £136.95

  • Brand: Notch
  • Product Code: LW-36680
  • Inc. Tax:

The Notch Safebloc has been designed and developed by David Driver of X-Rigging Rings and the results are a revolutionary friction tool for rope rigging work.

The block itself is a triple hole thimble and adds friction in the rigging system to the top of the tree which adds safety by reducing rigging point stress, compared to a system that uses a block or pulley.  

With the benefit of friction the climber can often take over on the rigging line AFTER the groundperson controlled the initial drop. This is true on small-to-medium loads. This frees up the groundperson to use both hands and the climber can FINISH the lowering.

Use the SafeBloc anywhere you'd use an arborist block for lowering. The rigging line can be woven through the three holes for its maximum friction, or fewer holes for less friction. However, the climber should not have to travel back to the SafeBloc to do any adjustments; just pick the friction level predicted and continue to use it. The SafeBloc does NOT add significant friction. A device that added too much friction could be dangerous and fatigue the short length of rope between the SafeBloc and the material being lowered. 

Lightweight and durable, the SafeBloc has no moving parts to wear out or damage, and is hard-coated for extended wear.

  • Notch SafeBloc



·       Lightweight

·       Durable

·       Weight: 2.25lb

·       Height: 1.57in (40mm)

·       Inner Diameter: 1.49 in (38 mm)

·       Triple hole



There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good

Copyright © 2022 Sorbus International Ltd

Somerset Web Design